2024+ Ford F150 Tremor Modular Bumper Fog Light Kit

Four-pod LED fog light kit for the 2024–2026 Ford F-150 Tremor (modular bumper)

This M&R Automotive kit replaces the factory fog lights on the 2024–2026 Ford F-150 Tremor (modular bumper) with 3D-printed shrouds that each hold two PRO pods: a 20W pod with a fog beam angled 15° outward to fill the sides and foreground, and a 40W pod with a driving beam aimed straight ahead for distance.

This kit includes the driver and passenger shrouds, four PRO pods (two 20W and two 40W) and two H11 adapters. The H11 adapters plug into the factory fog light connectors so the factory fog light switch turns the pods on. Pick the main color (white or yellow) for the 40W and 20W pods separately; every pod also has an amber DRL backglow.

Key features

• Two beams per side: A 20W fog pod angled 15° outward plus a 40W driving pod aimed forward.
• Factory switch control: Two H11 adapters connect to the factory fog light plugs.
• Direct replacement: Bolts in using factory openings and hardware with no cutting or drilling.
• ASA-GF shroud: Glass-fiber reinforced ASA, chosen for UV, weather and heat resistance on the front of a truck.
• PRO pod build: TIR lenses, 304 aluminum housings with UV polyester powder coat, thermal management, and a 50,000-hour rating.

Fitment and installation

Fits: 2024-2026 Ford F150 Tremor
Trims: only fits the MODULAR BUMPER

• Direct replacement of your factory fog light.
• This kit includes the Driver and Passenger side.
• No cutting or drilling required. The kit is a complete bolt on using factory openings and hardware.
• 2 H11 adapters included - they plug into your factory fog light connectors so your factory fog light switch can turn the pods on.

This kit fits the Tremor modular bumper only. It will not work with the Tremor standard bumper; for that truck, look for the 2024+ Ford F150 Tremor Standard Bumper Fog Light Kit.

Choosing light colors

White is a crisp, bright beam; yellow cuts through dust, fog, snow and rain better. You can mix colors between the 40W and 20W pods. The amber DRL backglow is low output and mainly a styling accent. The fog/driving beam split is the supplier's default; contact us if you want a different beam pattern.

About the 3D-printed shroud

The shrouds are printed in ASA-GF, an engineering-grade automotive polymer from the same family used for factory exterior trim, not common desktop filaments like PLA or PETG. The supplier says it is rigid, UV and weather resistant, and holds its shape in summer heat.

What's included

• 3D-printed ASA-GF fog light shroud × 2 (driver and passenger)
• 20W PRO pod (fog beam) × 2
• 40W PRO pod (driving beam) × 2
• H11 adapter × 2
• Wiring harness, mounting brackets and hardware × 1 set (as shown in the kit photo)

Specifications

• Pods: two 20W PRO pods, two 40W PRO pods
• Beam patterns: fog (20W, angled 15° outward), driving (40W)
• Main beam color: white or yellow, chosen separately for 20W and 40W pods, with amber DRL backglow
• Current draw at 12V: 20W pod 2.06 A main, 0.03 A DRL; 40W pod 3.30 A main, 0.07 A DRL
• Shroud material: ASA-GF (glass-fiber reinforced ASA)
• Pod housing: 304 aluminum, UV polyester powder coat
• Rated lifespan: 50,000 hours
• Connection: H11 adapters to factory fog light connectors
• Fitment: 2024–2026 Ford F-150 Tremor (modular bumper)
• Use: main beam off-road only

Setup notes

• Disconnect the battery before wiring, fuse the power feed, and route wires away from heat, sharp edges and moving parts.
• After installing, test every mode (main beam and DRL where equipped) and aim the light before heading out.
• The main beam is for off-road use only. Check your local laws before using any auxiliary lighting on public roads.

Browse more truck lighting in our Lighting collection, or see everything for your truck in the Ford collection.